PDA

View Full Version : DVL motor requirements


Bigfish
01-04-2011, 04:31 PM
Hey guys we are selling our motor and was ask if it was legal for DVL. I don't even know what the requirements are,(motors never been in fresh water) any help?

thanks jim

crawdadguy
01-04-2011, 05:16 PM
4 stroke and certain 2 strokes like the E-tech...but there are better experts here that could comment what do you got?

Bigfish
01-04-2011, 05:33 PM
2001 yamaha 200 hpdi (2 stroke)

LOPAKA
01-04-2011, 10:36 PM
Eh Jim hope you feel better soon, hope this helps

ENGINE REQUIREMENTS

To be allowed onto the reservoirs, you’ll need the cleaner burning models that comply with California Air Resources Board emission standards for model year 2001 or later (or the equivalent 2006 standard set by the U.S. Environmental Protection Agency)

With the exception of personal watercraft, all four-cycle engines (regardless of year) are allowed on DVL and Lake Skinner.

If your engine is model year 2001 or later , and made by the following major marine engine manufacturers , it should comply:

Johnson and Evinrude.
Honda Motor Corp.
Yamaha Motor Corp.
Suzuki Motor Corp.
Tohatsu Corp.
Mercury Marine.
Nissan Marine.
If you are still not sure look for the stars New technology engines (model year 2001 and later) have a one-to-three star decal showing they comply with emission standards. Or check for the label EPA-certified engines from 1998 to 2000 display an Emission Control Information label that shows it complies with 2001 (or later) California emission regulations for spark-ignition marine engines.

For supporting details, check the owner's manual or the manufacturer's Web site.

What about pre-1998 engines?

Pre-1998 two-cycle engines that use carburetors or electronic fuel injection (EFI) technology, will not comply with the combustion engine requirements for use on DVL or Lake Skinner.

Bigfish
01-04-2011, 10:53 PM
Looks like it's good. Thanks for the info.

jim

bluefin2na
01-05-2011, 04:24 PM
Sniff Sniff Snifff,, I smell ROAD TRIP

Bigfish
01-05-2011, 07:02 PM
I will let you know after Chris gets back, Don't know if the motor will run in fresh water :)